Failed import from JDiveLog

Diego Mainou Diego.Mainou at
Thu Nov 22 21:49:23 PST 2012

Ok, I managed to import something via the command line.

However, a large number of dives have not imported the time in the sample.

This is how one of them looks like:

<dive number="1110" date="2012-04-01" time="09:58" duration="37:27 min">
    <depth max="48.4 m" mean="24.39 m"/>
    <temperature water="18.1 C"/>
    <location>Australia NSW Sydney Birchgrove Park</location>
Diveactivity: Relaxation
Divetype: Boat Dive - Decompression
Comment: Computer Settings:  ZH-L16 GF CC 30% / 85%</notes>
    <cylinder o2="49%" size="0 l" start="0 bar" end="0 bar"/>
    <cylinder o2="21%" size="0 l" start="0 bar" end="0 bar"/>
    <event type="" name="deco" time="0:00 min"/>
    <event type="" name="PPO2 HIGH" time="0:00 min"/>
    <event name="gaschange" time="0:00 min" value="21"/>
    <event name="gaschange" time="0:00 min" value="49"/>
    <sample time="0:00 min" depth="0.0 m"/>
    <sample time="0:00 min" depth="3.92 m"/>
    <sample time="0:00 min" depth="6.2 m"/>
    <sample time="0:00 min" depth="9.43 m"/>
    <sample time="0:00 min" depth="12.43 m"/>
    <sample time="0:00 min" depth="15.67 m"/>
    <sample time="0:00 min" depth="18.92 m" temp="296.84999999999997"/>
    <sample time="0:00 min" depth="22.51 m"/>
    <sample time="0:00 min" depth="26.32 m"/>
    <sample time="0:00 min" depth="29.95 m"/>
    <sample time="0:00 min" depth="33.55 m"/>
    <sample time="0:00 min" depth="36.84 m"/>
    <sample time="0:00 min" depth="38.54 m" temp="296.04999999999995"/>
    <sample time="0:00 min" depth="40.62 m"/>
    <sample time="0:00 min" depth="41.82 m"/>
    <sample time="0:00 min" depth="43.08 m"/>
    <sample time="0:00 min" depth="45.17 m"/>


Diego Mainou

On 23 November 2012 01:21, Miika Turkia <miika.turkia at> wrote:

> Sounds like you have plenty of stuff that is not tested on the import.
> However, I would have thought that most of it is just ignored rather
> than failing altogether.
> You can try with xsltproc for debugging:
> xsltproc xslt/jdivelog2subsurface.xslt <your JDiveLog file>
> This should show any possible errors to you unlike subsurface. Then a
> few sample dives from JDiveLog would allow to implement / verify tank
> changes, conversion of mixes etc.
> miika
> On Thu, Nov 22, 2012 at 1:52 PM, Diego Mainou
> <Diego.Mainou at> wrote:
> > Hi guys,
> >
> > I'm trying to import my dives from JDiveLog and for some reason nothing
> is
> > happening.
> >
> > I'd appreciate if someone would be so kind to point me in the right
> > direction to report the bug?
> >
> > The log has a number of OC, CC, single tank, multiple tank/mix, deco and
> > dives as well as some manually entered ones.
> >
> > It also has a history of downloads of at least 3 computers (suunto,
> N2ition
> > 3 & HW OSTC) possibly a SW Predator as well but can't remember.
> >
> > Any help will be appreciated.
> >
> > Diego Mainou
> >
> >
> > _______________________________________________
> > subsurface mailing list
> > subsurface at
> >
> >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <>

More information about the subsurface mailing list