Uwatec Smart Com
Dirk Hohndel
dirk at hohndel.org
Sun Apr 14 06:55:47 PDT 2013
Looking back into our own mail archive, I think I now understand what
your problem may be (and that is an omission in our documentation it
seems).
In order for irda devices to work you appear to have to call
sudo irattach irda0 -s
in order to connect the new device to the irda utilities...
I don't have such a device so I had forgotten about it.
Can you try and confirm, please?
Thanks
/D
"himura.kenshin at libero.it" <himura.kenshin at libero.it> writes:
> Hi,
>
> I've got your e-mail address from dirkhh in #subsurface at irc.freenode.net.
>
> If I write you, it's because I've a connection problem with my Uwatec Smart
> Com (that seems to be supported according to the internet site of subsurface).
>
> When I try to connect my pc with my SmartCom Uwatec (I'm using a usb-IrDA
> bundle), subsurface suggests me to use /dev/ttyUSB0 as device/mount point, but
> then I get the message "Unable to open Uwatec Smart Com (/dev/ttyUSB0)". I'm
> running kubuntu 12.04.
> I tryed to understand what was wrong, so I tryed to type in the terminal the
> following commands (results are at the end of this e-mail):
> 1/ lsusb && lsusb -t
> 2/ dmesg
> 3/ subsurface -v
>
> But I'm a newbie and still unable to understand what is wrong.The only useful
> information I can give you is that when I was on MS Windows XP (10 years ago)
> that usb-IrDA bundle used to work fine with my SmartCom and SmartTrak (the
> software of Uwatec). Now I've left windows because of some issue on my pc and
> be very happy with Linux and don't want to change back or emulate the other OS.
>
> I hope that someone of you was able to communiate to an Uwatec Smart Com with
> subsurface, and if so, please help me.
>
> Thank you in advance.
>
> Yours faithfully,
>
> Ab3L
> (#ubuntu-it-chat, #kubuntu-offtopic, and other @ irc.freenode.net)
>
> ========
>
> Results of lsusb && lsusb -t
>
>
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 002: ID 046d:0825 Logitech, Inc. Webcam C270
> Bus 001 Device 004: ID 1058:1110 Western Digital Technologies, Inc.
> Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
> Bus 003 Device 002: ID 03f0:0b0c Hewlett-Packard Wireless Keyboard and Optical
> Mouse
> receiver
> Bus 001 Device 009: ID 066f:4210 SigmaTel, Inc. STIr4210 IrDA
> Bridge
> /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p,
> 12M
> /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p,
> 12M
> /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p,
> 12M
> |__ Port 1: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5
> M
> |__ Port 1: Dev 2, If 1, Class=HID, Driver=usbhid, 1.5
> M
> /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p,
> 12M
> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p,
> 480M
> |__ Port 2: Dev 2, If 0, Class='bInterfaceClass 0x0e not yet handled',
> Driver=uvcvideo,
> 480M
> |__ Port 2: Dev 2, If 1, Class='bInterfaceClass 0x0e not yet handled',
> Driver=uvcvideo,
> 480M
> |__ Port 2: Dev 2, If 2, Class=audio, Driver=snd-usb-audio,
> 480M
> |__ Port 2: Dev 2, If 3, Class=audio, Driver=snd-usb-audio,
> 480M
> |__ Port 4: Dev 4, If 0, Class=stor., Driver=usb-storage, 480M
> |__ Port 6: Dev 9, If 0, Class=app., Driver=ir-usb, 480M
> |__ Port 7: Dev 5, If 0, Class=stor., Driver=usb-storage, 480M
>
>
> ===================
>
> Results of dmesg
>
> [46137.144980] usb 1-6: new high-speed USB device number 9 using ehci_hcd
> [46137.307259] IRDA-USB found at address 9, Vendor: 66f, Product: 4210
> [46137.307839] irda_usb_parse_endpoints(), And our endpoints are : in=02,
> out=01 (512), int=00[46137.346415] irda_usb_init_qos(), dongle says
> speed=0x17F, size=0x20, window=0x8, bofs=0x80, turn=0x4[46137.347530] IrDA:
> Registered device irda0[46137.349860] STIR421X: Couldn't upload patch
> [46137.384419] irda-usb: probe of 1-6:1.0 failed with error -2[46137.384452] ir-
> usb 1-6:1.0: IR Dongle converter detected[46137.384749] usb 1-6: IR Dongle
> converter now attached to ttyUSB0
>
> ===================
>
> Results of subsurface -v
>
> [4.099] ERROR: No dive computer found. [in uwatec_smart.c:193
> (uwatec_smart_device_open)]
>
> ===================
>
> And also results of dpkg -l | grep -i dive
>
> ii diveboard-plugin
> 1.2.0 Web Browser plugin for
> DiveBoard:
> ii libdivecomputer0 0.3.0-
> 1~exp1ppa1 dive computer interface library
> ii subsurface 3.0.2-
> 1~exp2ppa1 Logbook program for scuba divers
>
>
> _______________________________________________
> subsurface mailing list
> subsurface at hohndel.org
> http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface
--
Dirk Hohndel
Intel Open Source Technology Center
More information about the subsurface
mailing list