Double DC strange behavior [was: Prev/Next DC]
Davide DB
dbdavide at gmail.com
Tue Dec 23 04:10:07 PST 2014
I repeated the sequence and I was able to reproduce the bug.
I exported the dive before/after the new DC import in subsurface format.
Comparing the two xml files I see that after importing the new DC
profile it added a wrong air gas and it modified just one sample with
a phantom "sensor '3'" attribute.
This is the inserted cylinder:
<cylinder description='Air' start='218.25 bar' end='83.75 bar' />
This is the modified sample:
<sample time='0:12 min' depth='4.98 m' temp='18.4 C' pressure='218.25
bar' sensor='3' />
BTW the new computer added also this:
<notes>" "</notes>
Before adding the new dc profile, the start/end pressure were
calculated (and correctly displayed) by galileo stored pressure
samples.
I will file a bug later.
Bye
On Tue, Dec 23, 2014 at 12:28 PM, Davide DB <dbdavide at gmail.com> wrote:
> Hummm,
>
> I think I got a nasty bug using two computers. I ask here before I file a bug.
>
> I have a dive logged with a Galileo sol and a xdeep black Bottom timers.
>
> 1) I downloaded Galileo data
> 2) I filled all the relevant info as gas used, tanks, pressures, gas
> switches....
> 3) everything is fine.
> 4) I import xdeep data
> 5) I lost gas switches and gas used hence sac... One gas switch on
> Galielo went to the xdeep.
>
> What should I see in this complicated situation?
>
> I was expecting to find one of the following:
>
> #1 the same gas switches and gas I add on a profile are copied on the other
> #2 The second profile is virgin so I have to insert again gas switches
>
> Actually option #2 would bring me in a dead end: different SAC so only
> option #1 is correct
>
>
> --
> Davide
> https://vimeo.com/bocio/videos
--
Davide
https://vimeo.com/bocio/videos
More information about the subsurface
mailing list