[PATCH 6/7] Lift code out to write_ostc_settings
Anton Lundin
glance at acc.umu.se
Sun Dec 28 23:52:12 PST 2014
This lifts the writing of settings out of the run() method and
introduces better error handling when libdivecomputer returns a
error.
Signed-off-by: Anton Lundin <glance at acc.umu.se>
---
configuredivecomputerthreads.cpp | 607 ++++++++++++++++++++-------------------
1 file changed, 306 insertions(+), 301 deletions(-)
diff --git a/configuredivecomputerthreads.cpp b/configuredivecomputerthreads.cpp
index 9df0f65..34b2a4b 100644
--- a/configuredivecomputerthreads.cpp
+++ b/configuredivecomputerthreads.cpp
@@ -1083,6 +1083,308 @@ static dc_status_t read_ostc_settings(dc_device_t *device, DeviceDetails *m_devi
return rc;
}
+static dc_status_t write_ostc_settings(dc_device_t *device, DeviceDetails *m_deviceDetails)
+{
+ dc_status_t rc;
+ unsigned char data[256] = {};
+ unsigned char max_CF = 0;
+
+ // Because we write whole memory blocks, we read all the current
+ // values out and then change then ones we should change.
+ rc = hw_ostc_device_eeprom_read(device, 0, data, sizeof(data));
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+ //Byte5-6:
+ //Gas 1 default (%O2=21, %He=0)
+ gas gas1 = m_deviceDetails->gas1();
+ data[6] = gas1.oxygen;
+ data[7] = gas1.helium;
+ //Byte9-10:
+ //Gas 2 default (%O2=21, %He=0)
+ gas gas2 = m_deviceDetails->gas2();
+ data[10] = gas2.oxygen;
+ data[11] = gas2.helium;
+ //Byte13-14:
+ //Gas 3 default (%O2=21, %He=0)
+ gas gas3 = m_deviceDetails->gas3();
+ data[14] = gas3.oxygen;
+ data[15] = gas3.helium;
+ //Byte17-18:
+ //Gas 4 default (%O2=21, %He=0)
+ gas gas4 = m_deviceDetails->gas4();
+ data[18] = gas4.oxygen;
+ data[19] = gas4.helium;
+ //Byte21-22:
+ //Gas 5 default (%O2=21, %He=0)
+ gas gas5 = m_deviceDetails->gas5();
+ data[22] = gas5.oxygen;
+ data[23] = gas5.helium;
+ //Byte25-26:
+ //Gas 6 current (%O2, %He)
+ data[26] = m_deviceDetails->salinity();
+ // Gas types, 0=Disabled, 1=Active, 2=Fist
+ // Active Gas Flag Register
+ data[27] = 0;
+ if (gas1.type)
+ data[27] ^= 0x01;
+ if (gas2.type)
+ data[27] ^= 0x02;
+ if (gas3.type)
+ data[27] ^= 0x04;
+ if (gas4.type)
+ data[27] ^= 0x08;
+ if (gas5.type)
+ data[27] ^= 0x10;
+
+ // Gas switch depths
+ data[28] = gas1.depth;
+ data[29] = gas2.depth;
+ data[30] = gas3.depth;
+ data[31] = gas4.depth;
+ data[32] = gas5.depth;
+ // 33 which gas is Fist gas
+ if (gas1.type == 2)
+ data[33] = 1;
+ else if (gas2.type == 2)
+ data[33] = 2;
+ else if (gas3.type == 2)
+ data[33] = 3;
+ else if (gas4.type == 2)
+ data[33] = 4;
+ else if (gas5.type == 2)
+ data[33] = 5;
+ else
+ // FIXME: No gas was First?
+ // Set gas 1 to first
+ data[33] = 1;
+
+ data[34] = m_deviceDetails->decoType();
+ //Byte36:
+ //Use O2 Sensor Module in CC Modes (0= OFF, 1= ON) (Only available in old OSTC1 - unused for OSTC Mk.2/2N)
+ //m_deviceDetails->setCcrMode(data[35]);
+ data[36] = m_deviceDetails->sp1().sp;
+ data[37] = m_deviceDetails->sp2().sp;
+ data[38] = m_deviceDetails->sp3().sp;
+ // Byte41-42:
+ // Lowest Battery voltage seen (in mV)
+ // Byte43:
+ // Lowest Battery voltage seen at (Month)
+ // Byte44:
+ // Lowest Battery voltage seen at (Day)
+ // Byte45:
+ // Lowest Battery voltage seen at (Year)
+ // Byte46-47:
+ // Lowest Battery voltage seen at (Temperature in 0.1 °C)
+ // Byte48:
+ // Last complete charge at (Month)
+ // Byte49:
+ // Last complete charge at (Day)
+ // Byte50:
+ // Last complete charge at (Year)
+ // Byte51-52:
+ // Total charge cycles
+ // Byte53-54:
+ // Total complete charge cycles
+ // Byte55-56:
+ // Temperature Extrema minimum (Temperature in 0.1 °C)
+ // Byte57:
+ // Temperature Extrema minimum at (Month)
+ // Byte58:
+ // Temperature Extrema minimum at (Day)
+ // Byte59:
+ // Temperature Extrema minimum at (Year)
+ // Byte60-61:
+ // Temperature Extrema maximum (Temperature in 0.1 °C)
+ // Byte62:
+ // Temperature Extrema maximum at (Month)
+ // Byte63:
+ // Temperature Extrema maximum at (Day)
+ // Byte64:
+ // Temperature Extrema maximum at (Year)
+ // Byte65:
+ // Custom Text active (=1), Custom Text Disabled (<>1)
+ // Byte66-90:
+ // (25Bytes): Custom Text for Surfacemode (Real text must end with "}")
+ // Example: "OSTC Dive Computer}" (19 Characters incl. "}") Bytes 85-90 will be ignored.
+ if (m_deviceDetails->customText() == "") {
+ data[64] = 0;
+ } else {
+ data[64] = 1;
+ // Copy the string to the right place in the memory, padded with 0x20 (" ")
+ strncpy((char *)data + 65, QString("%1").arg(m_deviceDetails->customText(), -23, QChar(' ')).toUtf8().data(), 23);
+ // And terminate the string.
+ if (m_deviceDetails->customText().length() <= 23)
+ data[65 + m_deviceDetails->customText().length()] = '}';
+ else
+ data[90] = '}';
+ }
+ // Byte91:
+ // Dim OLED in Divemode (>0), Normal mode (=0)
+ // Byte92:
+ // Date format for all outputs:
+ // =0: MM/DD/YY
+ // =1: DD/MM/YY
+ // =2: YY/MM/DD
+ data[91] = m_deviceDetails->dateFormat();
+ // Byte93:
+ // Total number of CF used in installed firmware
+ max_CF = data[92];
+ // Byte94:
+ // Last selected view for customview area in surface mode
+ // Byte95:
+ // Last selected view for customview area in dive mode
+ // Byte96-97:
+ // Diluent 1 Default (%O2,%He)
+ // Byte98-99:
+ // Diluent 1 Current (%O2,%He)
+ gas dil1 = m_deviceDetails->dil1();
+ data[97] = dil1.oxygen;
+ data[98] = dil1.helium;
+ // Byte100-101:
+ // Gasuent 2 Default (%O2,%He)
+ // Byte102-103:
+ // Gasuent 2 Current (%O2,%He)
+ gas dil2 = m_deviceDetails->dil2();
+ data[101] = dil2.oxygen;
+ data[102] = dil2.helium;
+ // Byte104-105:
+ // Gasuent 3 Default (%O2,%He)
+ // Byte106-107:
+ // Gasuent 3 Current (%O2,%He)
+ gas dil3 = m_deviceDetails->dil3();
+ data[105] = dil3.oxygen;
+ data[106] = dil3.helium;
+ // Byte108-109:
+ // Gasuent 4 Default (%O2,%He)
+ // Byte110-111:
+ // Gasuent 4 Current (%O2,%He)
+ gas dil4 = m_deviceDetails->dil4();
+ data[109] = dil4.oxygen;
+ data[110] = dil4.helium;
+ // Byte112-113:
+ // Gasuent 5 Default (%O2,%He)
+ // Byte114-115:
+ // Gasuent 5 Current (%O2,%He)
+ gas dil5 = m_deviceDetails->dil5();
+ data[113] = dil5.oxygen;
+ data[114] = dil5.helium;
+ // Byte116:
+ // First Diluent (1-5)
+ if (dil1.type == 2)
+ data[115] = 1;
+ else if (dil2.type == 2)
+ data[115] = 2;
+ else if (dil3.type == 2)
+ data[115] = 3;
+ else if (dil4.type == 2)
+ data[115] = 4;
+ else if (dil5.type == 2)
+ data[115] = 5;
+ else
+ // FIXME: No first diluent?
+ // Set gas 1 to fist
+ data[115] = 1;
+
+ // Byte117-128:
+ // not used/reserved
+ // Byte129-256:
+ // 32 custom Functions (CF0-CF31)
+
+ // Write the relevant ones
+ // CF11: Factor for saturation processes
+ write_ostc_cf(data, 11, max_CF, m_deviceDetails->saturation());
+ // CF12: Factor for desaturation processes
+ write_ostc_cf(data, 12, max_CF, m_deviceDetails->desaturation());
+ // CF17: Lower threshold for ppO2 warning
+ write_ostc_cf(data, 17, max_CF, m_deviceDetails->ppO2Min());
+ // CF18: Upper threshold for ppO2 warning
+ write_ostc_cf(data, 18, max_CF, m_deviceDetails->ppO2Max());
+ // CF20: Depth sampling rate for Profile storage
+ write_ostc_cf(data, 20, max_CF, m_deviceDetails->samplingRate());
+ // CF29: Depth of last decompression stop
+ write_ostc_cf(data, 29, max_CF, m_deviceDetails->lastDeco());
+
+#ifdef DEBUG_OSTC_CF
+ for (int cf = 0; cf <= 31 && cf <= max_CF; cf++)
+ printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
+#endif
+ rc = hw_ostc_device_eeprom_write(device, 0, data, sizeof(data));
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+
+ rc = hw_ostc_device_eeprom_read(device, 1, data, sizeof(data));
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+ // Byte1:
+ // Logbook version indicator (Not writable!)
+ // Byte2-3:
+ // Last Firmware installed, 1st Byte.2nd Byte (e.g. „1.90“) (Not writable!)
+ // Byte4:
+ // OLED brightness (=0: Eco, =1 High) (Not writable!)
+ // Byte5-11:
+ // Time/Date vault during firmware updates
+ // Byte12-128
+ // not used/reserved
+ // Byte129-256:
+ // 32 custom Functions (CF 32-63)
+
+ // Decode the relevant ones
+ // CF32: Gradient Factor low
+ write_ostc_cf(data, 32, max_CF, m_deviceDetails->gfLow());
+ // CF33: Gradient Factor high
+ write_ostc_cf(data, 33, max_CF, m_deviceDetails->gfHigh());
+ // CF58: Future time to surface setFutureTTS
+ write_ostc_cf(data, 58, max_CF, m_deviceDetails->futureTTS());
+#ifdef DEBUG_OSTC_CF
+ for (int cf = 32; cf <= 63 && cf <= max_CF; cf++)
+ printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
+#endif
+ rc = hw_ostc_device_eeprom_write(device, 1, data, sizeof(data));
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+
+ rc = hw_ostc_device_eeprom_read(device, 2, data, sizeof(data));
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+ // Byte1-4:
+ // not used/reserved (Not writable!)
+ // Byte5-128:
+ // not used/reserved
+ // Byte129-256:
+ // 32 custom Functions (CF 64-95)
+
+ // Decode the relevant ones
+ // CF65: Show safety stop
+ write_ostc_cf(data, 65, max_CF, m_deviceDetails->safetyStop());
+ // CF67: Alternaitve Gradient Factor low
+ write_ostc_cf(data, 67, max_CF, m_deviceDetails->aGFLow());
+ // CF68: Alternative Gradient Factor high
+ write_ostc_cf(data, 68, max_CF, m_deviceDetails->aGFHigh());
+ // CF69: Allow Gradient Factor change
+ write_ostc_cf(data, 69, max_CF, m_deviceDetails->aGFSelectable());
+#ifdef DEBUG_OSTC_CF
+ for (int cf = 64; cf <= 95 && cf <= max_CF; cf++)
+ printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
+#endif
+ rc = hw_ostc_device_eeprom_write(device, 2, data, sizeof(data));
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+
+ //sync date and time
+ if (m_deviceDetails->syncTime()) {
+ QDateTime timeToSet = QDateTime::currentDateTime();
+ dc_datetime_t time;
+ time.year = timeToSet.date().year();
+ time.month = timeToSet.date().month();
+ time.day = timeToSet.date().day();
+ time.hour = timeToSet.time().hour();
+ time.minute = timeToSet.time().minute();
+ time.second = timeToSet.time().second();
+ rc = hw_ostc_device_clock(device, &time);
+ }
+ return rc;
+}
+
void ReadSettingsThread::run()
{
bool supported = false;
@@ -1187,309 +1489,12 @@ void WriteSettingsThread::run()
#ifdef DEBUG_OSTC
case DC_FAMILY_NULL:
#endif
- case DC_FAMILY_HW_OSTC: {
+ case DC_FAMILY_HW_OSTC:
supported = true;
- unsigned char data[256] = {};
- unsigned char max_CF = 0;
-
- // Because we write whole memory blocks, we read all the current
- // values out and then change then ones we should change.
- rc = hw_ostc_device_eeprom_read(m_data->device, 0, data, sizeof(data));
- if (rc == DC_STATUS_SUCCESS) {
- //Byte5-6:
- //Gas 1 default (%O2=21, %He=0)
- gas gas1 = m_deviceDetails->gas1();
- data[6] = gas1.oxygen;
- data[7] = gas1.helium;
- //Byte9-10:
- //Gas 2 default (%O2=21, %He=0)
- gas gas2 = m_deviceDetails->gas2();
- data[10] = gas2.oxygen;
- data[11] = gas2.helium;
- //Byte13-14:
- //Gas 3 default (%O2=21, %He=0)
- gas gas3 = m_deviceDetails->gas3();
- data[14] = gas3.oxygen;
- data[15] = gas3.helium;
- //Byte17-18:
- //Gas 4 default (%O2=21, %He=0)
- gas gas4 = m_deviceDetails->gas4();
- data[18] = gas4.oxygen;
- data[19] = gas4.helium;
- //Byte21-22:
- //Gas 5 default (%O2=21, %He=0)
- gas gas5 = m_deviceDetails->gas5();
- data[22] = gas5.oxygen;
- data[23] = gas5.helium;
- //Byte25-26:
- //Gas 6 current (%O2, %He)
- data[26] = m_deviceDetails->salinity();
- // Gas types, 0=Disabled, 1=Active, 2=Fist
- // Active Gas Flag Register
- data[27] = 0;
- if (gas1.type)
- data[27] ^= 0x01;
- if (gas2.type)
- data[27] ^= 0x02;
- if (gas3.type)
- data[27] ^= 0x04;
- if (gas4.type)
- data[27] ^= 0x08;
- if (gas5.type)
- data[27] ^= 0x10;
-
- // Gas switch depths
- data[28] = gas1.depth;
- data[29] = gas2.depth;
- data[30] = gas3.depth;
- data[31] = gas4.depth;
- data[32] = gas5.depth;
- // 33 which gas is Fist gas
- if (gas1.type == 2)
- data[33] = 1;
- else if (gas2.type == 2)
- data[33] = 2;
- else if (gas3.type == 2)
- data[33] = 3;
- else if (gas4.type == 2)
- data[33] = 4;
- else if (gas5.type == 2)
- data[33] = 5;
- else
- // FIXME: No gas was First?
- // Set gas 1 to first
- data[33] = 1;
-
- data[34] = m_deviceDetails->decoType();
- //Byte36:
- //Use O2 Sensor Module in CC Modes (0= OFF, 1= ON) (Only available in old OSTC1 - unused for OSTC Mk.2/2N)
- //m_deviceDetails->setCcrMode(data[35]);
- data[36] = m_deviceDetails->sp1().sp;
- data[37] = m_deviceDetails->sp2().sp;
- data[38] = m_deviceDetails->sp3().sp;
- // Byte41-42:
- // Lowest Battery voltage seen (in mV)
- // Byte43:
- // Lowest Battery voltage seen at (Month)
- // Byte44:
- // Lowest Battery voltage seen at (Day)
- // Byte45:
- // Lowest Battery voltage seen at (Year)
- // Byte46-47:
- // Lowest Battery voltage seen at (Temperature in 0.1 °C)
- // Byte48:
- // Last complete charge at (Month)
- // Byte49:
- // Last complete charge at (Day)
- // Byte50:
- // Last complete charge at (Year)
- // Byte51-52:
- // Total charge cycles
- // Byte53-54:
- // Total complete charge cycles
- // Byte55-56:
- // Temperature Extrema minimum (Temperature in 0.1 °C)
- // Byte57:
- // Temperature Extrema minimum at (Month)
- // Byte58:
- // Temperature Extrema minimum at (Day)
- // Byte59:
- // Temperature Extrema minimum at (Year)
- // Byte60-61:
- // Temperature Extrema maximum (Temperature in 0.1 °C)
- // Byte62:
- // Temperature Extrema maximum at (Month)
- // Byte63:
- // Temperature Extrema maximum at (Day)
- // Byte64:
- // Temperature Extrema maximum at (Year)
- // Byte65:
- // Custom Text active (=1), Custom Text Disabled (<>1)
- // Byte66-90:
- // (25Bytes): Custom Text for Surfacemode (Real text must end with "}")
- // Example: OSTC Dive Computer} (19 Characters incl. "}") Bytes 85-90 will be ignored.
- if (m_deviceDetails->customText() == "") {
- data[64] = 0;
- } else {
- data[64] = 1;
- // Copy the string to the right place in the memory, padded with 0x20 (" ")
- strncpy((char *)data + 65, QString("%1").arg(m_deviceDetails->customText(), -23, QChar(' ')).toUtf8().data(), 23);
- // And terminate the string.
- if (m_deviceDetails->customText().length() <= 23)
- data[65 + m_deviceDetails->customText().length()] = '}';
- else
- data[90] = '}';
- }
- // Byte91:
- // Dim OLED in Divemode (>0), Normal mode (=0)
- // Byte92:
- // Date format for all outputs:
- // =0: MM/DD/YY
- // =1: DD/MM/YY
- // =2: YY/MM/DD
- data[91] = m_deviceDetails->dateFormat();
- // Byte93:
- // Total number of CF used in installed firmware
- max_CF = data[92];
- // Byte94:
- // Last selected view for customview area in surface mode
- // Byte95:
- // Last selected view for customview area in dive mode
- // Byte96-97:
- // Diluent 1 Default (%O2,%He)
- // Byte98-99:
- // Diluent 1 Current (%O2,%He)
- gas dil1 = m_deviceDetails->dil1();
- data[97] = dil1.oxygen;
- data[98] = dil1.helium;
- // Byte100-101:
- // Gasuent 2 Default (%O2,%He)
- // Byte102-103:
- // Gasuent 2 Current (%O2,%He)
- gas dil2 = m_deviceDetails->dil2();
- data[101] = dil2.oxygen;
- data[102] = dil2.helium;
- // Byte104-105:
- // Gasuent 3 Default (%O2,%He)
- // Byte106-107:
- // Gasuent 3 Current (%O2,%He)
- gas dil3 = m_deviceDetails->dil3();
- data[105] = dil3.oxygen;
- data[106] = dil3.helium;
- // Byte108-109:
- // Gasuent 4 Default (%O2,%He)
- // Byte110-111:
- // Gasuent 4 Current (%O2,%He)
- gas dil4 = m_deviceDetails->dil4();
- data[109] = dil4.oxygen;
- data[110] = dil4.helium;
- // Byte112-113:
- // Gasuent 5 Default (%O2,%He)
- // Byte114-115:
- // Gasuent 5 Current (%O2,%He)
- gas dil5 = m_deviceDetails->dil5();
- data[113] = dil5.oxygen;
- data[114] = dil5.helium;
- // Byte116:
- // First Diluent (1-5)
- if (dil1.type == 2)
- data[115] = 1;
- else if (dil2.type == 2)
- data[115] = 2;
- else if (dil3.type == 2)
- data[115] = 3;
- else if (dil4.type == 2)
- data[115] = 4;
- else if (dil5.type == 2)
- data[115] = 5;
- else
- // FIXME: No first diluent?
- // Set gas 1 to fist
- data[115] = 1;
-
- // Byte117-128:
- // not used/reserved
- // Byte129-256:
- // 32 custom Functions (CF0-CF31)
-
- // Write the relevant ones
- // CF11: Factor for saturation processes
- write_ostc_cf(data, 11, max_CF, m_deviceDetails->saturation());
- // CF12: Factor for desaturation processes
- write_ostc_cf(data, 12, max_CF, m_deviceDetails->desaturation());
- // CF17: Lower threshold for ppO2 warning
- write_ostc_cf(data, 17, max_CF, m_deviceDetails->ppO2Min());
- // CF18: Upper threshold for ppO2 warning
- write_ostc_cf(data, 18, max_CF, m_deviceDetails->ppO2Max());
- // CF20: Depth sampling rate for Profile storage
- write_ostc_cf(data, 20, max_CF, m_deviceDetails->samplingRate());
- // CF29: Depth of last decompression stop
- write_ostc_cf(data, 29, max_CF, m_deviceDetails->lastDeco());
-
-#ifdef DEBUG_OSTC_CF
- for (int cf = 0; cf <= 31 && cf <= max_CF; cf++)
- printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
-#endif
- rc = hw_ostc_device_eeprom_write(m_data->device, 0, data, sizeof(data));
- if (rc != DC_STATUS_SUCCESS) {
- //FIXME: ERROR!
- }
- }
- rc = hw_ostc_device_eeprom_read(m_data->device, 1, data, sizeof(data));
- if (rc == DC_STATUS_SUCCESS) {
- // Byte1:
- // Logbook version indicator (Not writable!)
- // Byte2-3:
- // Last Firmware installed, 1st Byte.2nd Byte (e.g. „1.90“) (Not writable!)
- // Byte4:
- // OLED brightness (=0: Eco, =1 High) (Not writable!)
- // Byte5-11:
- // Time/Date vault during firmware updates
- // Byte12-128
- // not used/reserved
- // Byte129-256:
- // 32 custom Functions (CF 32-63)
-
- // Decode the relevant ones
- // CF32: Gradient Factor low
- write_ostc_cf(data, 32, max_CF, m_deviceDetails->gfLow());
- // CF33: Gradient Factor high
- write_ostc_cf(data, 33, max_CF, m_deviceDetails->gfHigh());
- // CF58: Future time to surface setFutureTTS
- write_ostc_cf(data, 58, max_CF, m_deviceDetails->futureTTS());
-#ifdef DEBUG_OSTC_CF
- for (int cf = 32; cf <= 63 && cf <= max_CF; cf++)
- printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
-#endif
- rc = hw_ostc_device_eeprom_write(m_data->device, 1, data, sizeof(data));
- if (rc != DC_STATUS_SUCCESS) {
- //FIXME: ERROR!
- }
- }
- rc = hw_ostc_device_eeprom_read(m_data->device, 2, data, sizeof(data));
- if (rc == DC_STATUS_SUCCESS) {
- // Byte1-4:
- // not used/reserved (Not writable!)
- // Byte5-128:
- // not used/reserved
- // Byte129-256:
- // 32 custom Functions (CF 64-95)
-
- // Decode the relevant ones
- // CF65: Show safety stop
- write_ostc_cf(data, 65, max_CF, m_deviceDetails->safetyStop());
- // CF67: Alternaitve Gradient Factor low
- write_ostc_cf(data, 67, max_CF, m_deviceDetails->aGFLow());
- // CF68: Alternative Gradient Factor high
- write_ostc_cf(data, 68, max_CF, m_deviceDetails->aGFHigh());
- // CF69: Allow Gradient Factor change
- write_ostc_cf(data, 69, max_CF, m_deviceDetails->aGFSelectable());
-#ifdef DEBUG_OSTC_CF
- for (int cf = 64; cf <= 95 && cf <= max_CF; cf++)
- printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
-#endif
- rc = hw_ostc_device_eeprom_write(m_data->device, 2, data, sizeof(data));
- if (rc != DC_STATUS_SUCCESS) {
- //FIXME: ERROR!
- }
- }
- //sync date and time
- if (m_deviceDetails->syncTime()) {
- QDateTime timeToSet = QDateTime::currentDateTime();
- dc_datetime_t time;
- time.year = timeToSet.date().year();
- time.month = timeToSet.date().month();
- time.day = timeToSet.date().day();
- time.hour = timeToSet.time().hour();
- time.minute = timeToSet.time().minute();
- time.second = timeToSet.time().second();
- rc = hw_ostc_device_clock(m_data->device, &time);
- if (rc != DC_STATUS_SUCCESS) {
- //FIXME: ERROR!
- }
- }
+ rc = write_ostc_settings(m_data->device, m_deviceDetails);
+ if (rc != DC_STATUS_SUCCESS)
+ emit error(tr("Failed!"));
break;
- }
default:
supported = false;
break;
--
2.1.0
More information about the subsurface
mailing list