Show deco stops in planner table

[Dirk Hohndel]

On Sun, Jun 01, 2014 at 03:56:56PM +0200, Joakim Bygdell wrote:
> >> Gas consumption:
> >> 2581l of EAN27
> >> 0l of EAN32
> >> 0l of (24/24)
> >> 0l of EAN30
> > 
> > There are two observations here:
> > a) it is by design that Subsurface looks at all cylinders that are
> > available and tries to find the best ones to use in the plan. Using the
> > cylinders from the selected dive to start your plan is simply a
> > convenience - if you want to just use EAN27 and nothing else, delete the
> > other cylinders
> 
> Except that in the planner view only one gasmix is listed under Available Gases. And that one is air by default.

Now I'm confused.
You clearly have tanks with these gases. I bet this goes back to "show
unused tanks" in the preferences. Can you set this option and try again?

> The other gas mixes exist in the drop down menus for Used Gas but they are never assigned to a tank which generates the zero consumption error.

I am working on code that only lists consumption for the tanks you
actually used. This unfortunately causes some other odd side effects that
makes me want to address other issues. Nothing is ever simple :-/

> The gases in the Used Gas list should not be active unless they are assigned to a tank and as such should be visible in the Available Gases window.

See above. The gases are only there if there's a tank. So we need to
simply force "show unused tanks" on in planner mode.

> In order to remove the unwanted gas mixes I first have to add equal  number of tanks to the Available Gases windows that exsits in the Used Gas menu, this seems a bit backwards.

yeah, that's not how it should work.

/D