Technical Discussion on VPM

[Gopichand Paturi]

On Sun, Mar 9, 2014 at 7:29 PM, Tomaz Canabrava <tcanabrava at kde.org> wrote:

> Gopichard,
>
>
> On Sun, Mar 9, 2014 at 10:19 AM, Gopichand Paturi <
> gopichandpaturi at gmail.com> wrote:
>
>> Hi Tomaz,
>> Actually I took that line from the website, I just copied and pasted it
>> here.
>> I just wanted to show Robert that line in the website which is needed in
>> the conversation. That website data had that colour.
>>
>> Actually I did not know that would cause problems.
>> I will make sure I don't do that again :-)
>>
>
> No problem. If you use GMail there's an option to remove the colors of the
> e-mail, please use :)
> Other thing, do you see that me and the rest of the guys answers
> everyone's e-mail in the middle of the e-mail, in a way that people reading
> it can look at a bit of the history of the conversation before answering?
>
>   Done !! From now-on I'm mid-posting. I never knew I had to do this.

  Thanks for the help :D


> This is called mid-posting, and what you do ( answering on the top ) is
> called top-posting, and it's also bad because it breaks the flux of the
> conversation. In your following e-mails, please answer on the middle of the
> sentenses that your prase makes sense. ;)
>
>
>
>>
>> Regards,
>> Gopichand.
>>
>>
>> On Sun, Mar 9, 2014 at 6:44 PM, Tomaz Canabrava <tcanabrava at kde.org>wrote:
>>
>>>
>>>
>>>
>>> On Sun, Mar 9, 2014 at 10:09 AM, Gopichand Paturi <
>>> gopichandpaturi at gmail.com> wrote:
>>>
>>>> Hi Robert,
>>>> Small development in my understanding.
>>>>
>>>> Please see this link
>>>> http://www.deepocean.net/deepocean/index.php?science04.php
>>>>
>>>> In this if you actually go down the page where it's given to handle
>>>> reformulated VPM,
>>>> I see that the  initial radius is same across compartments is defined
>>>> as critical radius.
>>>> Also this value is a constant (based on experiments) so I think we can
>>>> proceed with this value which is of the order of microns.
>>>>
>>>>
>>>> So, I think this is a valid statement,
>>>>
>>>>
>>>> surface tension γ, the crumbling compression γc, the minimum initial
>>>> radius r0min, the regeneration time constant τR and a composite
>>>> parameter λ. The latter is related to the critical volume Vcrit. The
>>>> parameters are the same for each compartment.
>>>>
>>>
>>> Gopichard, please don't send e-mails with colors, it is terrible to read
>>> on some e-mail clients.
>>>
>>>
>>>>
>>>>
>>>> Let me know your feedback.
>>>>
>>>> Regards,
>>>> Gopichand.
>>>>
>>>>
>>>> On Sun, Mar 9, 2014 at 2:25 PM, Gopichand Paturi <
>>>> gopichandpaturi at gmail.com> wrote:
>>>>
>>>>> Hi Robert (atdotde),
>>>>>
>>>>> First of all I wanted to get clear on the initial radius of bubble to
>>>>> be taken.
>>>>> So, as I went through the permeability theory I learnt that, solutions
>>>>> have inherently microbubbles called Nuclei of
>>>>> size[0.01MicroMeter-1Micrometer].
>>>>> that are at unstable equlibrium in every solution.
>>>>>
>>>>> I think we need to initialize bubble of each inert gas with the
>>>>> specific size in a compartment depending on the mixture of the gas. That
>>>>> means I think we need to put 3 bubbles in each compartment if it is a
>>>>> Trimix.
>>>>>
>>>>> So my idea is that we put the radius in order of some microns with the
>>>>> knowledge of nuclei of specific gas in the solution as the initial value.
>>>>>
>>>>> Please give me your suggestions and ideas regarding this.
>>>>>
>>>>> Thanks&Regards,
>>>>> Gopichand.
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> subsurface mailing list
>>>> subsurface at hohndel.org
>>>> http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hohndel.org/pipermail/subsurface/attachments/20140309/1d362079/attachment-0001.html>