OSTC3 import failure

[Gaetan Bisson]

[2014-10-10 09:11:37 +0200] Jef Driesen:
> What happens during the parsing is that you have extended sample info 3 set
> as follows:
> 
> info[3].type = 3
> info[3].divisor = 2
> info[3].size = 9
> 
> This corresponds to ppO2 sensor data. At the point where the parsing fails
> (10th sample at offset 0x160), the remaining length is only 8 bytes. So
> that's not enough for the 9 byte large ppO2 sensor data. Now we only need to
> figure out the root of the problem :-)

That's strange: there should not be any ppO2 sensor data since I was
running my OSTC3 in fixed SP mode, completely disconnected from my
oxyscans.

-- 
Gaetan