RFC: Suunto Vyper Air configuration

[Jef Driesen]

On 2015-02-06 14:49, Guillaume Gardet wrote:
> Currently, we are able to configure Suunto Vyper family with sample
> rates of 10, 20, 30 or 60 per seconds.
> The problem is that the Suunto Vyper Air is also able to set the
> sample rate to 1 per second.

The Vyper and Vyper Air belong to two different families, with a 
completely different communication protocol. I believe the subsurface 
configuration feature does support the vyper family only. So this is not 
really an issue today.

Jef