Liquid Vision dive log/Lynx support?

Miika Turkia miika.turkia at gmail.com
Sun Mar 8 09:28:59 PDT 2015


Can you verify if I got the pressure information from correct sensor? The
logic is based on luck, we treat the first pressure sensor reading to be
from diver's own cylinder... If you can check if the pressure readings are
taken from the correct DC in all of these sample dives, that might tell us
that the logic is not completely bogus...

miika

On Thu, Mar 5, 2015 at 7:27 AM, Tim Thaler <tpthaler at gmail.com> wrote:

> Hello,
>
>         Attached is a smaller / older dive log file from my wife's profile
> that might be easier to work with than mine. Every dive should have two
> tank pressure readings. It will probably be helpful to have the Liquivision
> Dive Logger software to open this in and see how the buddy pressure works.
> And also note, sometimes the "buddies" pressure doesn't start till a few
> minutes into the dive as it doesn't have good range until both sonar
> transmitters are completely submerged (so you may have to click a minute
> into the dive to see both tank pressures). Let me know if I can be of any
> more help... I'de help with the code, but as a Java developer I would
> probably do more harm than good!
>
> Best Regards,
> Tim Thaler
>
>
>
> On Wed, Mar 4, 2015 at 11:16 PM, Miika Turkia <miika.turkia at gmail.com>
> wrote:
>
>> I'll need a sample log to test the two pressures and to figure out how it
>> is represented and correct our import. I suppose, it'll be just one sensor
>> in the profile in the beginning, but who knows if both pressures would be
>> doable as well.
>>
>> miika
>>
>> On Thu, Mar 5, 2015 at 3:31 AM, Tim Thaler <tpthaler at gmail.com> wrote:
>>
>>> Hey Guys,
>>>
>>>        Not sure if you want this in a new thread or not, but I just
>>> downloaded your software and imported my dives (about 50).... Anyways, I
>>> dive in "Buddy" mode, which means that I track both my air and my wifes air
>>> are logged. When it's imported into your software, it seems to log both our
>>> air on one solid line. This is virtually useless... Ideally, I could plot
>>> my wifes air over my air, but if that's too complex, it would be nice to be
>>> able to filter out her air, so that it's not combined with mine...  Do you
>>> think this is possible to do?
>>>
>>
>>
>>> On Saturday, November 8, 2014 at 7:38:03 AM UTC-6, Henrik Brautaset
>>> Aronsen wrote:
>>>
>>>> On Sat, Nov 8, 2014 at 1:05 PM, Miika Turkia <miika.... at gmail.com>
>>>> wrote:
>>>>
>>>>> Does the brand new LVD file import take care of the required Liquid
>>>>> Vision support?
>>>>>
>>>>
>>>> Yup, it takes care of the Liquivision (note the name) file format, when
>>>> exported from the companion Windows software.   It does not import directly
>>>> from the computer, however.
>>>>
>>>>
>>>>> Does it add any value if CSV support was implemented as well?
>>>>>
>>>>
>>>> I don't think so.  The CSV's I've seen so far have been via Divinglog's
>>>> export functionality.
>>>>
>>>> Henrik
>>>>
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20150308/dcc6fe2d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: liq.xml.zip
Type: application/zip
Size: 136252 bytes
Desc: not available
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20150308/dcc6fe2d/attachment-0001.zip>


More information about the subsurface mailing list