Petrel 2 Download

[Benjamin]

On 20 May 2015 at 14:40, Rick Walsh <rickmwalsh at gmail.com> wrote:

> Det funkar, tack så mycket Anton!
>
> [rick at localhost ~]$ sudo rfcomm -i hci1 connect 0 00:13:43:0E:6B:D0 5
> Connected /dev/rfcomm0 to 00:13:43:0E:6B:D0 on channel 5
> Press CTRL-C for hangup
>
> The connection works with channel 5.  I have no idea what's special
> about channel 5 but I'm not complaining.
>
> After connecting, to get Subsurface to download from the Petrel I had
> to add myself to the dialout group (or run Subsurface as root, which
> is a lazy but silly thing to do) in order to avoid permissions errors
> when downloading, but that's pretty standard.
>
> <snip>
>
> Willem, there's now a solution/workaround that works for me, but
> unfortunately it's a bit messy and I'm not sure if it will work the
> same on other systems.  I'll play around a bit more, testing my
> different bluetooth dongles (and onboard device) and perhaps different
> distros.  I'll see if I can write something for the manual this
> weekend or next week.
>
> Rick
> _______________________________________________
> subsurface mailing list
> subsurface at subsurface-divelog.org
> http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
>

Thank you!
Channel 5 works for me too, on both my on-board (Samsung 13 inch NP300V3A
laptop) bluetooth and with the Shearwater dongle. It also works with a
Toshiba laptop's (Satellite A500 138) on-board bluetooth. Both are running
Fedora 21 and the BlueZ 5 stack.

Benjamin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20150522/eddccb93/attachment.html>