ostc BT download failure

[Miika Turkia]

On Thu, Oct 1, 2015 at 2:28 AM, Jef Driesen <jef at libdivecomputer.org> wrote:
> On 2015-09-29 20:06, Miika Turkia wrote:
>>
>> I am testing out OSTC sport and BT download. However, this fails
>> miserably:
>> ---8<---
>> INFO: Sleep: value=300
>> Event: model=18 (0x00000012), firmware=2578 (0x00000a12), serial=10321
>> (0x00002851)
>
>
> You have an OSTC Sport with firmware v10.18.

Yep, and now updated to v10.20. As I mentioned on another email, I was
able to download successfully once, but since then downloads have
failed.

>> ERROR: Failed to receive the answer. [in hw_ostc3.c:242
>> (hw_ostc3_transfer)]
>> ERROR: Failed to read the header. [in hw_ostc3.c:635
>> (hw_ostc3_device_foreach)]
>
>
> This is an error during the download of the full headers. Without more
> verbose logging ("enable libdivecomputer logfile"), it's hard to tell what
> exactly is going wrong here. It looks like we received the command echo, but
> no data packet (or not a complete packet).

I don't seem to be getting any better logs when enabling the
libdivecomputer logfile. Here is the latest log when I successfully
donwloaded one dive, but failed after that:

INFO: Sleep: value=300
Event: model=18 (0x00000012), firmware=2580 (0x00000a14), serial=10321
(0x00002851)
ERROR: Failed to receive the answer. [in hw_ostc3.c:242 (hw_ostc3_transfer)]
ERROR: Failed to read the dive. [in hw_ostc3.c:744 (hw_ostc3_device_foreach)]
ERROR: Failed to receive the echo. [in hw_ostc3.c:200 (hw_ostc3_transfer)]
ERROR: Failed to send the command. [in hw_ostc3.c:487 (hw_ostc3_device_close)]

miika