Beta Testing - Dive Planner

Robert C. Helling helling at atdotde.de
Sun Sep 13 21:38:30 PDT 2015


John,

> On 13 Sep 2015, at 17:33, John Smith <noseygit at hotmail.com <mailto:noseygit at hotmail.com>> wrote:
> 
> 2. When you have an initial setpoint of say 0.7 in your plan, there is a gradient, from surface to the point that air would give you 0.7, in the PPO2 line, even though that wouldnt be the case in real life on ccr. It also occurs when you put a set point change in, but that would be likely to have a gradient.

Sorry, I don’t understand what you want to say here.

> 3.If I click toggle ruler, a red line appears on my PPO2 line but I dont know what it shows (I looked in manual but its not immediately clearof what it shows). However, if I unclick it it doesn't disappear, that is until I click on another toggle such as scale graph. Funnily enough, if I don't unclick toggle ruler and click scale graph, the red line disappears again.
> 4.Finally, I ran a buhlmann 100/100 calculation, i would expect the stops to match up with the tissue limits and calculated ceilings (see attached grab). They seem to be out of sync in this example. This of course may be because I don't know what I'm doing :).

These seem to be related. In fact, it looks like the planner (but not the displayed ceilings) get the setpoint changes wrong. You can tell by for example changing the stepping of the 50m leg of the dive: That affects the ceilings but not the plan.

Will look at this later today.

Best
Robert
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20150914/20cca6ea/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 496 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20150914/20cca6ea/attachment.sig>


More information about the subsurface mailing list