[PATCH v2] Add a simple cp2130 libusb driver

Anton Lundin glance at acc.umu.se
Sun Sep 18 05:56:44 PDT 2016


This adds a simple cp2130 userspace driver. Its probably unusable in the
real world but its a great base to build upon.

Signed-off-by: Anton Lundin <glance at acc.umu.se>
---
 CMakeLists.txt                    |   1 +
 android/res/xml/device_filter.xml |   3 +
 core/CMakeLists.txt               |   7 +
 core/libdivecomputer.c            |   4 +
 core/libdivecomputer.h            |   1 +
 core/serial_cp2130.c              | 283 ++++++++++++++++++++++++++++++++++++++
 6 files changed, 299 insertions(+)
 create mode 100644 core/serial_cp2130.c

diff --git a/CMakeLists.txt b/CMakeLists.txt
index 095160c..104c323 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -33,6 +33,7 @@ option(NO_USERMANUAL "don't include a viewer for the user manual" OFF)
 option(FBSUPPORT "allow posting to Facebook" ON)
 option(BTSUPPORT "enable support for QtBluetooth (requires Qt5.4 or newer)" ON)
 option(FTDISUPPORT "enable support for libftdi based serial" OFF)
+option(CP2130SUPPORT "enable support for cp2130 based serial" OFF)
 
 # Options regarding What should we build on subsurface
 option(MAKE_TESTS "Make the tests" ON)
diff --git a/android/res/xml/device_filter.xml b/android/res/xml/device_filter.xml
index fc9333b..19e535e 100644
--- a/android/res/xml/device_filter.xml
+++ b/android/res/xml/device_filter.xml
@@ -11,4 +11,7 @@
     <usb-device vendor-id="1027" product-id="63104"/>
     <!-- Cressi (Leonardo) Custom PID -->
     <usb-device vendor-id="1027" product-id="63104"/>
+
+	<!-- CP2130 Chip -->
+	<usb-device vendor-id="4292" product-id="34720"/>
 </resources>
diff --git a/core/CMakeLists.txt b/core/CMakeLists.txt
index 5c22e23..dff8361 100644
--- a/core/CMakeLists.txt
+++ b/core/CMakeLists.txt
@@ -18,6 +18,12 @@ if(FTDISUPPORT)
 	set(SERIAL_FTDI serial_ftdi.c)
 endif()
 
+if(CP2130SUPPORT)
+	message(STATUS "building with cp2130 support")
+	add_definitions(-DSERIAL_CP2130)
+	set(SERIAL_CP2130 serial_cp2130.c)
+endif()
+
 if(BTSUPPORT)
 	add_definitions(-DBT_SUPPORT)
 	set(BT_SRC_FILES desktop-widgets/btdeviceselectiondialog.cpp)
@@ -89,6 +95,7 @@ set(SUBSURFACE_CORE_LIB_SRCS
 	subsurface-qt/CylinderObjectHelper.cpp
 	subsurface-qt/SettingsObjectWrapper.cpp
 	${SERIAL_FTDI}
+	${SERIAL_CP2130}
 	${PLATFORM_SRC}
 	${BT_CORE_SRC_FILES}
 )
diff --git a/core/libdivecomputer.c b/core/libdivecomputer.c
index cd1b69b..f76a654 100644
--- a/core/libdivecomputer.c
+++ b/core/libdivecomputer.c
@@ -1034,6 +1034,10 @@ const char *do_libdivecomputer_import(device_data_t *data)
 	} else if (!strcmp(data->devname, "ftdi")) {
 		rc = dc_context_set_custom_serial(data->context, &serial_ftdi_ops);
 #endif
+#ifdef SERIAL_CP2130
+	} else if (!strcmp(data->devname, "cp2130")) {
+		rc = dc_context_set_custom_serial(data->context, &cp2130_serial_ops);
+#endif
 	}
 
 	if (rc != DC_STATUS_SUCCESS) {
diff --git a/core/libdivecomputer.h b/core/libdivecomputer.h
index f2894b0..8a91fcf 100644
--- a/core/libdivecomputer.h
+++ b/core/libdivecomputer.h
@@ -65,6 +65,7 @@ extern char *dumpfile_name;
 // Thats why I've worked around it with a stupid helper returning it.
 dc_custom_serial_t* get_qt_serial_ops();
 extern dc_custom_serial_t serial_ftdi_ops;
+extern dc_custom_serial_t cp2130_serial_ops;
 #endif
 
 #ifdef __cplusplus
diff --git a/core/serial_cp2130.c b/core/serial_cp2130.c
new file mode 100644
index 0000000..e6fb659
--- /dev/null
+++ b/core/serial_cp2130.c
@@ -0,0 +1,283 @@
+/*
+ * This is code from and inspired by https://www.silabs.com/Support%20Documents/TechnicalDocs/AN792.pdf
+ */
+
+#include <string.h>     // memset
+#include <stdlib.h>		// malloc, free
+#include <stdbool.h>	// bool
+/*
+#include <errno.h>      // errno
+#include <sys/time.h>   // gettimeofday
+#include <time.h>       // nanosleep
+#include <stdio.h>
+*/
+
+#include <libusb.h>
+#include <ftdi.h>
+
+#include <libdivecomputer/custom_serial.h>
+
+typedef struct cp2130_serial_t {
+	/** libusb's context */
+	struct libusb_context *context;
+	/** libusb's usb_dev_handle */
+	struct libusb_device_handle *cp2130Handle;
+	/** Should we re-attach native driver? */
+	bool kernelAttached;
+
+	long timeout;
+} cp2130_serial_t;
+
+static dc_status_t cp2130_serial_close (void **userdata);
+/*
+8.1.3. Initialization and Device Discovery
+The sample application shows the calls necessary to initialize and discover a device.
+The steps that need to be taken to get a handle to the CP2130 device are:
+1. Initialize LibUSB using libusb_init().
+2. Get the device list using libusb_get_device_list() and find a device to connect to.
+3. Open the device with LibUSB using libusb_open().
+4. Detach any existing kernel connection by checking libusb_kernel_driver_active() and using
+libusb_detach_kernel_driver() if it is connected to the kernel.
+5. Claim the interface using libusb_claim_interface().
+Here is the program listing from the sample application with comments for reference:
+*/
+static dc_status_t cp2130_serial_open (void **userdata, const char* name) {
+	// Allocate memory.
+	cp2130_serial_t *device = (cp2130_serial_t*) malloc (sizeof (cp2130_serial_t));
+	libusb_device **deviceList = NULL;
+	struct libusb_device_descriptor deviceDescriptor;
+	libusb_device *usb_device = NULL;
+	dc_status_t rc = DC_STATUS_SUCCESS;
+
+	if (device == NULL)
+		return DC_STATUS_NOMEMORY;
+
+	memset(device, 0, sizeof (cp2130_serial_t));
+
+	// Default to blocking io
+	device->timeout = -1;
+
+	// Initialize libusb
+	if (libusb_init(&device->context) != 0)
+		goto exit;
+
+	// Search the connected devices to find and open a handle to the CP2130
+	size_t deviceCount = libusb_get_device_list(device->context, &deviceList);
+	if (deviceCount <= 0)
+		goto exit;
+
+	for (int i = 0; i < deviceCount; i++) {
+		if (libusb_get_device_descriptor(deviceList[i], &deviceDescriptor) == 0) {
+			if ((deviceDescriptor.idVendor == 0x10C4) && (deviceDescriptor.idProduct == 0x87A0)) {
+				usb_device = deviceList[i];
+				break;
+			}
+		}
+	}
+	if (usb_device == NULL) {
+		rc = DC_STATUS_NODEVICE;
+		goto exit;
+	}
+
+	// If a device is found, then open it
+	if (libusb_open(usb_device, &device->cp2130Handle) != 0) {
+		rc = DC_STATUS_IO;
+		goto exit;
+	}
+
+	// See if a kernel driver is active already, if so detach it and store a
+	// flag so we can reattach when we are done
+	if (libusb_kernel_driver_active(device->cp2130Handle, 0) != 0) {
+		libusb_detach_kernel_driver(device->cp2130Handle, 0);
+		device->kernelAttached = true;
+	}
+	// Finally, claim the interface
+	if (libusb_claim_interface(device->cp2130Handle, 0) != 0) {
+		rc = DC_STATUS_IO;
+		goto exit;
+	}
+
+	*userdata = device;
+
+	if (deviceList)
+		libusb_free_device_list(deviceList, 1);
+
+	return rc;
+
+exit:
+	if (deviceList)
+		libusb_free_device_list(deviceList, 1);
+
+	(void)cp2130_serial_close((void**)&device);
+
+	return rc;
+}
+
+/*
+8.1.4. Uninitialization
+The sample code also shows the calls necessary to uninitialize a device.
+The steps need to be taken to disconnect from the CP2130 device are:
+1. Release the interface using libusb_release_interface().
+2. Reattach from the kernel using libusb_attach_kernel_driver() (only if the device was connected to the
+kernel previously).
+3. Close the LibUSB handle using libusb_close().
+4. Free the device list we obtained originaly using libusb_free_device_list().
+5. Uninitialize LibUSB using libusb_exit().
+Here is the program listing from the sample application for reference:
+*/
+static dc_status_t cp2130_serial_close (void **userdata) {
+	cp2130_serial_t *device = (cp2130_serial_t*) *userdata;
+
+	if (device == NULL)
+		return DC_STATUS_SUCCESS;
+
+	if (device->cp2130Handle)
+		libusb_release_interface(device->cp2130Handle, 0);
+	if (device->kernelAttached)
+		libusb_attach_kernel_driver(device->cp2130Handle, 0);
+	if (device->cp2130Handle)
+		libusb_close(device->cp2130Handle);
+	if (device->context)
+		libusb_exit(device->context);
+
+	free(device);
+
+	return DC_STATUS_SUCCESS;
+}
+
+/*
+8.1.5.1. Control Requests
+The example GPIO function will get/set the GPIO values with a control request. Each of the commands defined in
+section "6. Configuration and Control Commands (Control Transfers)" can be used with the LibUSB control
+request function. Each of the paramaters will map to the LibUSB function. In this example we will refer to section
+"6.6. Get_GPIO_Values (Command ID 0x20)" .
+In this command there is a bmRequestType, bRequest and wLength. In this case the other paramaters, wValue
+and wIndex, are set to 0. These parameters are used directly with the libusb_control_transfer_function and it will
+return the number of bytes transferred. Here is the definition:
+
+int libusb_control_transfer(libusb_device_handle* dev_handle, uint8_t bmRequestType, uint8_t bRequest, uint16_t wValue, uint16_t wIndex, unsigned char* data, uint16_t wLength, unsigned int timeout)
+
+After putting the defined values from section "6.6.2. Setup Stage (OUT Transfer)" in the function, this is the resulting call to get the GPIO
+
+unsigned char control_buf_out[2];
+libusb_control_transfer(cp2130Handle, 0xC0, 0x20, 0x0000, 0x0000, control_buf_out, sizeof(control_buf_out), usbTimeout);
+
+*/
+
+/*
+8.1.5.2. Bulk OUT Requests
+The example write function will send data to the SPI MOSI line. To perform writes, use the description in section
+"5.2. Write (Command ID 0x01)" to transmit data with the LibUSB bulk transfer function. Here is the definition:
+int libusb_bulk_transfer(struct libusb_device_handle* dev_handle, unsigned char endpoint,
+unsigned char* data, int length, int * transferred, unsigned int timeout)
+To perform a write to the MOSI line, pack a buffer with the specified data and payload then send the entire packet.
+Here is an example from the sample application that will write 6 bytes to endpoint 1:
+*/
+static dc_status_t cp2130_serial_write(void **userdata, const void *data, size_t size, size_t *actual) {
+	cp2130_serial_t *device = (cp2130_serial_t*) *userdata;
+	int libusb_status;
+	int bytesWritten;
+
+	if (device == NULL)
+		return DC_STATUS_SUCCESS;
+
+	unsigned char write_command_buf[14] = {
+		0x00, 0x00, // Reserved
+		0x01, // Write command
+		0x00, // Reserved
+		// Number of bytes, little-endian
+		size & 0xFF,
+		(size >> 8) & 0xFF,
+		(size >> 16) & 0xFF,
+		(size >> 24) & 0xFF,
+	};
+
+	libusb_status = libusb_bulk_transfer(device->cp2130Handle, 0x01, write_command_buf, sizeof(write_command_buf), &bytesWritten, device->timeout);
+
+	if (libusb_status != 0 || bytesWritten != sizeof(write_command_buf))
+		return DC_STATUS_IO; // Simplified for now.
+
+	libusb_status = libusb_bulk_transfer(device->cp2130Handle, 0x01, (unsigned char*) data, size, &bytesWritten, device->timeout);
+
+	if (actual)
+		*actual = bytesWritten;
+
+	if (libusb_status == 0)
+		return DC_STATUS_SUCCESS;
+	else
+		return DC_STATUS_IO; // Simplified for now.
+}
+/*
+The function will return 0 upon success, otherwise it will return an error code to check for the failure reason.
+*/
+
+/*
+8.1.5.3. Bulk IN Requests
+Note: Because there is no input to the SPI the read is commented out. The code itself demonstrates reading 6 bytes, but will
+not succeed since there is nothing to send this data to the host. This code is meant to serve as an example of how to
+perform a read in a developed system.
+The example read function will send a request to read data from the SPI MISO line. To perform reads, use the
+description in section "5.1. Read (Command ID 0x00)" to request data with the LibUSB bulk transfer function (see
+definition in "8.1.5.2. Bulk OUT Requests" , or the LibUSB documentation).
+To perform a read from the MISO line, pack a buffer with the specified read command then send the entire packet.
+Immediately after that, perform another bulk request to get the response. Here is an example from the sample
+application that will try to read 6 bytes from endpoint 1:
+*/
+
+static dc_status_t cp2130_serial_read (void **userdata, void *data, size_t size, size_t *actual) {
+	cp2130_serial_t *device = (cp2130_serial_t*) *userdata;
+	int libusb_status;
+	int bytesWritten, bytesRead;
+
+	if (device == NULL)
+		return DC_STATUS_SUCCESS;
+
+	// This example shows how to issue a bulk read request to the SPI MISO line
+	unsigned char read_command_buf[14] = {
+		0x00, 0x00, // Reserved
+		0x00, // Read command
+		0x00, // Reserved
+		// Read number of bytes, little-endian
+		size & 0xFF,
+		(size >> 8) & 0xFF,
+		(size >> 16) & 0xFF,
+		(size >> 24) & 0xFF,
+	};
+
+	libusb_status = libusb_bulk_transfer(device->cp2130Handle, 0x01, read_command_buf, sizeof(read_command_buf), &bytesWritten, device->timeout);
+
+	if (libusb_status != 0  || bytesWritten != sizeof(read_command_buf))
+		return DC_STATUS_IO; // Simplified for now.
+
+	libusb_status = libusb_bulk_transfer(device->cp2130Handle, 0x01, (unsigned char*) data, size, &bytesRead, device->timeout);
+
+	if (actual)
+		*actual = bytesRead;
+
+	if (libusb_status == 0)
+		return DC_STATUS_SUCCESS;
+	else
+		return DC_STATUS_IO; // Simplified for now.
+}
+/*
+The bulk transfer function will return 0 upon success, otherwise it will return an error code to check for the failure
+reason. In this case make sure to check that the bytesWritten is the same as the command buffer size as well as a
+successful transfer.
+*/
+
+dc_custom_serial_t cp2130_serial_ops = {
+	.userdata = NULL,
+	.open = cp2130_serial_open,
+	.close = cp2130_serial_close,
+	.read = cp2130_serial_read,
+	.write = cp2130_serial_write,
+// NULL means NOP
+	.purge = NULL,
+	.get_available = NULL,
+	.set_timeout = NULL,
+	.configure = NULL,
+	.set_dtr = NULL,
+	.set_rts = NULL,
+	.set_halfduplex = NULL,
+	.set_break = NULL
+};
-- 
2.7.4



More information about the subsurface mailing list