[PATCH] Visualisation of individual oxygen sensor data for CCR dives

[Joakim Bygdell]

 9 April 2017 at 11:39, Joakim Bygdell <j.bygdell at gmail.com> wrote:

>  9 April 2017 at 11:30, Davide DB <dbdavide at gmail.com> wrote:
>
>> On 9 April 2017 at 11:22, Joakim Bygdell <j.bygdell at gmail.com> wrote:
>> >  9 April 2017 at 11:01, Davide DB <dbdavide at gmail.com> wrote:
>> >>
>> >> I update my settings and nothing happens.
>> >> I have a Petrel 2 connected to a SF2 CCR with three sensors. I get
>> >> only one green line.
>> >
>> >
>> > I have data from both a Predator and a Petrel, in both cases only the
>> > consensus pO2 are reported
>> > together with the setpoint data.
>> >
>>
>> Hi Joakim and Steve,
>>
>> Thanks for the feedback.did you try with Shearwater desktop?
>>
>
> Not my DC so can't test.
> But according to the guy who owns the Predator it only shows one cell with
> Shearwaters software.
>

At least the Petrel2 should report 3 sensors.

Jef, how is on the backed side, how many sensors does libdivecomputer
supports for the Petrel series?

-- 
Jocke
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20170409/cf8241e6/attachment.html>