[PATCH] Visualisation of individual oxygen sensor data for CCR dives
glance at acc.umu.se
Sun Apr 9 05:00:34 PDT 2017
On 09 April, 2017 - Joakim Bygdell wrote:
> 9 April 2017 at 11:39, Joakim Bygdell <j.bygdell at gmail.com> wrote:
> > 9 April 2017 at 11:30, Davide DB <dbdavide at gmail.com> wrote:
> >> On 9 April 2017 at 11:22, Joakim Bygdell <j.bygdell at gmail.com> wrote:
> >> > 9 April 2017 at 11:01, Davide DB <dbdavide at gmail.com> wrote:
> >> >>
> >> >> I update my settings and nothing happens.
> >> >> I have a Petrel 2 connected to a SF2 CCR with three sensors. I get
> >> >> only one green line.
> >> >
> >> >
> >> > I have data from both a Predator and a Petrel, in both cases only the
> >> > consensus pO2 are reported
> >> > together with the setpoint data.
> >> >
> >> Hi Joakim and Steve,
> >> Thanks for the feedback.did you try with Shearwater desktop?
> > Not my DC so can't test.
> > But according to the guy who owns the Predator it only shows one cell with
> > Shearwaters software.
> At least the Petrel2 should report 3 sensors.
> Jef, how is on the backed side, how many sensors does libdivecomputer
> supports for the Petrel series?
I sort if figured out now to extract po2 valeues for all sensors from
Shearwater comptuers, but due to it being reverse-engineered code Jef
wanted to ask some contacts at Shearwater about it, and as far as I
know, we haven't yet had any answer from Shearwater.
Attached is this 1.5 years old patch, which I think its time to apply.
Anton Lundin +46702-161604
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 2975 bytes
Desc: not available
More information about the subsurface