Subsurface Planner: feature request

Stefan Fuchs sfuchs at gmx.de
Sun Jan 22 11:27:25 PST 2017


Hi All,

>>/Am 21.01.2017 um 13:28 schrieb Rick Walsh <rickmwalsh at gmail.com
<http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface>>:
/>>//>>/set the switch depth of the deco gas to either deeper than the max depth
of the dive (so you never switch to it), or very shallow (0.1m, so it
has negligible effect on the plan). /
>Alternatively, you first plan the dive with all gases, save and then re-edit the dive in planner, where you delete a cylinder. For the next cylinder, "save a copy" and then re-edit the original dive again. 


I'm also using the "set 'Deco switch at' to 99m" workaround.

Nevertheless I vote for the (small) "Use this gas" checkbox at the left
side of every table row. This would make life easier and from my point
of view lost gas considerations are an important feature.

Best regards
Stefan

-- 

Stefan Fuchs
Banzhaldenstr. 66
70469 Stuttgart
E-Mail: sfuchs at gmx.de <mailto:sfuchs at gmx.de>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20170122/56679445/attachment.html>


More information about the subsurface mailing list