OSTC over BLE experiences and questions
Jan Mulder
jlmulder at xs4all.nl
Tue Jul 4 08:53:09 PDT 2017
On 04-07-17 17:47, Matthias Heinrichs wrote:
> Hi Jan,
>
> Am 04.07.2017 um 15:23 schrieb Jan Mulder:
>> BT snoop file (made with btmon) is attached. Wireshark is your friend :-)
>
> The funny stuff happens between Packet #365 and #366 (most likely).
> Until then, the header (first 256byte) looks quite perfect (A dive from
> the 2nd July 2017 to 3082mbar max depth, 57min and 26seconds). It's
> properly closed with the 0xFB, 0xFB at the end.
>
> Then the first depth sample: 0xcf:0x46:0x00 -> 18127mbar depth (+0x00
> additional bytes)??!
> Second sample is just as wrong: 0x02:0x90:0x03:... -> 36866mbar depth
> (+0x03 additional bytes which are non-sense on their own like a manual
> gas change within the first two seconds PLUS a normal gas change).
>
> I checked my code and I can't see any difference between sending the
> header bytes and the profile bytes. Look for "comm_send_dive1:" in
> https://bitbucket.org/heinrichsweikamp/hwos_code/src/7db10ebae205ebb391cb15fe613a3d8301b87cba/src/comm.asm?at=default&fileviewer=file-view-default
>
>
> Hmm...
>
> Regards,
> Matthias
>
>
Not sure it is relevant ... dive is made with the OSTC3 in fixed
setpoint CCR mode. Going to look at your code tonight.
--jan
More information about the subsurface
mailing list