[PATCH] Visualisation of individual oxygen sensor data for CCR dives

[Davide DB]

Ok so I made a mistake. I thought 21 was most recent. I even look
carefully at the log trying to see if there was some reference.
I'm out at the office now. I will send you everything again later in
the afternoon off list.
The dives you have now are a mess because they are logs of early
training dives changing continuously setpoints (0.7 and 1.3) and going
bailout as exercise.

Sorry for wasting your time.

On 11 May 2017 at 14:15, Jef Driesen <jef at libdivecomputer.org> wrote:
> On 2017-05-10 22:16, Davide DB wrote:
>>
>> I downloaded dives from my SF2 Petrel controller via dctool.
>> I attached some of them here.
>>
>> Dives: 17, 18, 19, 20, 21 are mCCR with a setpoint of 0,7
>> Dive 15 is eCCR with setpoints of 0,7 and 1,3. It was a training dive
>> so you will find OC parts (bailout mode) with ppO2 that goes down to
>> 0,4.
>>
>> I hope it helps
>
>
> Are you sure you didn't mix up the dive numbers? The dctool outputs the
> dives in the order they are download (newest first). Thus dive #0001 is your
> most recent dive, and #0021 your oldest.
>
> The reason why I'm asking is the setpoints in the data don't match your
> description:
>
> Number;Date/time;Setpoints
> 0015;2017-02-19 16:54:53;0.70
> 0017;2017-02-18 15:40:41;0.70
> 0018;2017-02-17 16:40:42;0.70 and 1.30
> 0019;2017-02-17 16:14:18;0.70
> 0020;2017-02-17 15:57:05;0.70
> 0021;2012-01-01 19:59:50;0.70
>
> Jef



-- 
Davide
https://vimeo.com/bocio/videos