O2 sensor values on CCR dives

[Davide DB]

On 17 November 2017 at 19:10, Anton Lundin <glance at acc.umu.se> wrote:
> On 17 November, 2017 - Davide DB wrote:
>
>> Looking to one of my CCR dives (Petrel 2 controller) I realized that
>> Po2 values reported by Subsurface at the 6 meter stop are way higher
>> than those recorded and displayed by Shearwater Desktop.
>> I'm 100 sure that Shearwater Desktop shows correct values because I
>> perfectly remember O2 values I was seeing at 6 meter: I was never
>> never never over 1.6 for all the time.
>> According to Subsurface profile I was all the time at 6m over 1.6 with
>> spikes at 1.75.
>> Am I missing something?
>>
>> I chose a point in time (122' 50")and I attach three screenshots:
>>
>> Shearwater (which display only the AVG pO2)
>> Subsurface with single pO2 sensor display
>> Subsurface with AVG pO2 sensor display
>
> Could you dump the raw data from the device?
>
> It can be done using either dctool or using the predator protocol and
> creating a device dump.
>
>
> You could probably just send a log file of the download, I think I still
> got the tool to replay a log file as a download.
>
>
> Then I can take a look at the raw data to try to figure out what's going
> on.
>
>
> //Anton


After depleting one battery here are.

Dctool is a lucky process. 99% of the times I get errors like this:

[73.192176] ERROR: Failed to receive the response packet. [in
../../source/src/shearwater_common.c:319 (shearwater_common_transfer)]
[73.192715] ERROR: Failed to download the dive. [in
../../source/src/shearwater_petrel.c:266
(shearwater_petrel_device_foreach)]
[73.193107] ERROR: Error downloading the dives. [in
../../source/examples/dctool_download.c:218 (download)]
[73.193712] INFO: Write: size=9, data=FF0105002E902000C0

Raw file for the dive attached

Thanks a lot





-- 
Davide
https://vimeo.com/bocio/videos
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dive.0001.bin
Type: application/octet-stream
Size: 28288 bytes
Desc: not available
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20171117/661ec342/attachment-0001.bin>