Fwd: Re: [Subsurface-divelog/subsurface] Plot OC-pO2 graph for SCR dives (#1166)

[Willem Ferguson]

On 18/04/2018 15:42, Robert C. Helling wrote:
>
> Sorry, I missed this.
>
> From a coding perspective: This looks good to me.
>
> Could you explain, in which situation this "OC equivalent" becomes 
> relevant, why would one look at this line?
>
> Further, why don't you directly base this onto your branch which makes 
> the divemode time depenent (which is in my opinion close to merging)?
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub 
> <https://github.com/Subsurface-divelog/subsurface/pull/1166#issuecomment-382390636>, 
> or mute the thread 
> <https://github.com/notifications/unsubscribe-auth/AE1-sj4yiTVimcbksutR6VAMENv0ety9ks5tp0LSgaJpZM4Sqq3n>.
>
Hi Robert,

Your first question. When diving SCR rebreather, an important factor is 
the oxygen drop over the mouthpiece, i.e. the difference between OC-pO2 
and actually-measured pO2 in the loop of the rebreather; i.e. the 
vertical difference between the red and the green graphs in my initial 
screenshot. The larger the pO2 drop, the more decompression is added to 
the end of the dive because less oxygen usually means more nitrogen. 
However, the smaller the pO2 drop, the less efficient the rebreather is 
working and the SAC rate increases. On active SCR this is controlled by 
setting the rate of continuous gas addition. On pSCR this is controlled 
by opening or closing the gas release valve on the counterlung. So the 
vertical distance between the two graphs should ideally not be too large 
or too small, or at least managed within the objectives of the dive. In 
the case of a sticky or free-flowing injector, the red and green graphs 
start to converge, i.e. the closer one moves to an OC situation with 
little re-circulation of gas. Therefore sufficient distance between the 
red and green graphs is also an indication of well-working equipment. As 
indicated before, it is a situation very analogous to the setpoint of 
CCR equipment which provides a reference of how efficiently the gas 
addition management system works.

Your second question. This code is entirely independent of the 
divemode-dependent code, since pSCR dive logs is already part of the 
software.  As you know, the divemode-dependent branch primarily deals 
with bailout, which is an entirely different issue. Anyway, that is how 
I rationalised this to myself a month ago.

I hope I make some sense.

Kind regards,

willem




-- 
This message and attachments are subject to a disclaimer.

Please refer to 
http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf 
<http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf> for
full 
details.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20180418/83360a2f/attachment.html>