Bugs: profile for hand-entered dives

[Willem Ferguson]

When adding a dive by hand, one should be able to edit the dive profile 
on the profile panel as described in section 5.1.1 of the user manual. 
This currently does not happen. In fact it appears there are two bugs:

1) See attached image. The default profile of 15m for 45 minutes shows a 
crazy profile that is not useful to anybody. The descent rate to 15m 
should be in the order of 20m/min, NOT 15m/22min. Similarly the default 
ascent rate should be around 10m/min. The profile should have a square 
shape, not a triangular shape.

2) The normal red cross-haired cursor and the white points on the 
vertices of the profile are gone so that the default profile cannot be 
edited on the profile panel. See section 5.1.1 in user manual.

Kind regards,

willem




-- 
This message and attachments are subject to a disclaimer.

Please refer to 
http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf 
<http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf> for
full 
details.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: profile1.jpg
Type: image/jpeg
Size: 44562 bytes
Desc: not available
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20190622/3fe9291f/attachment-0001.jpg>