Suunto Zoop log for Christof's android changes

Miika Turkia miika.turkia at gmail.com
Mon Mar 16 08:25:12 PDT 2020


Official Suunto Vyper Air cable gives me this:

[63386.597279] usb 1-2: new full-speed USB device number 18 using xhci_hcd
[63386.752599] usb 1-2: New USB device found, idVendor=0403, idProduct=f680
[63386.752606] usb 1-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[63386.752611] usb 1-2: Product: Suunto Sports Instrument
[63386.752614] usb 1-2: Manufacturer: Suunto
[63386.752617] usb 1-2: SerialNumber: ST000001
[63386.756520] ftdi_sio 1-2:1.0: FTDI USB Serial Device converter detected
[63386.756623] usb 1-2: Detected FT232BM
[63386.757039] usb 1-2: FTDI USB Serial Device converter now attached to
ttyUSB0

Unfortunately the cable is broken, so cannot test downloading with it.

On Wed, Mar 11, 2020 at 10:28 AM Miika Turkia <miika.turkia at gmail.com>
wrote:

> Different cable, Vyper was a serial cable. I attached it using a random
> Chinese usb-serial adapter.
>
> On 11. Mar 2020, at 6.34, Christof Arnosti <charno at charno.ch> wrote:
>
> 
>
> Hi Miika,
>
> Just a short question: Did you use the same cable for both the D4 and the
> Vyper? If not, could you also send me the PID/VID of the Vyper cable?
>
> Thanks
> Christof
> On 10.03.20 09:12, Miika Turkia wrote:
>
> Well, what do you know, everything worked with logcat running. Both D4 and
> Vyper Air started downloading fine. D4 ran all the way through. Vyper I
> terminated after a few dives were loaded. Will do more testing when I have
> time.
>
> On 10. Mar 2020, at 7.40, Miika Turkia <miika.turkia at gmail.com>
> <miika.turkia at gmail.com> wrote:
>
> 
> I should be able to run logcat once I have collected more test data. I
> just need to figure out how to do that over wifi or BT. Have always
> connected with usb cable before, but that is not an option this time :)
>
> BTW I just realized that Garmin is not supported, but it should probably
> be relatively easy to add. It is mounted as a disk and we need to just
> point to right mount point. Or am I missing something?
>
> On 10. Mar 2020, at 6.45, Christof Arnosti <charno at charno.ch>
> <charno at charno.ch> wrote:
>
> 
>
> Hi,
>
> Thanks. The Info (idVendor / idProduct) is already in the log you sent, so
> no need to download the app.
>
> I want to get some (more or less) statistical data about which
> usb-to-serial chipset behaves how. This is a big help! :)
>
> If you have some experience in the android world, could you maybe try to
> run "adb logcat" while downloading the dives? The logcat output might help
> with pinpointing the application crash, and I think until now yours is the
> only report of an actual application crash.
>
> Best regards
> Christof
> Am 09.03.20 um 23:39 schrieb Miika Turkia:
>
> On Tue, Mar 10, 2020 at 6:32 AM Christof Arnosti via subsurface <
> subsurface at subsurface-divelog.org> wrote:
>
>> Thanks for the more in-depth ;-) test.
>>
>> Having a look at the serial-interface chipset-list at
>> http://libdivecomputer.org/drivers.html I noticed that suunto uses two
>> different chipsets. Maybe this could be a lead to follow up?
>>
>> Can the people owning a suunto computer maybe post the Vendor ID /
>> Product ID of their cable, and if it works or not? The App
>> https://play.google.com/store/apps/details?id=aws.apps.usbDeviceEnumerator
>> shows these values.
>>
> This is what I get on dmesg when attaching the D4 cable:
> ---8<---
> [30804.146977] usb 1-2: new full-speed USB device number 12 using xhci_hcd
> [30804.301648] usb 1-2: New USB device found, idVendor=0403, idProduct=6001
> [30804.301653] usb 1-2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [30804.301657] usb 1-2: Product: USB <-> Serial Cable
> [30804.301660] usb 1-2: Manufacturer: Smartinterface
> [30804.890118] usbcore: registered new interface driver ftdi_sio
> [30804.890187] usbserial: USB Serial support registered for FTDI USB
> Serial Device
> [30804.890504] ftdi_sio 1-2:1.0: FTDI USB Serial Device converter detected
> [30804.890728] usb 1-2: Detected FT232RL
> [30804.891105] usb 1-2: FTDI USB Serial Device converter now attached to
> ttyUSB0
> ---8<---
>
> Downloading from D4 with this cable on Android 7.1.1, the Subsurface
> crashes after about 4 dives. Do you think the OTG cable plays a part on
> this? I can try the app you mention if that would be beneficial.
>
> miika
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20200316/d5b9fed3/attachment.html>


More information about the subsurface mailing list