Dive planner problems

[Willem Ferguson]

On 2022/02/08 00:17, Michael Andreen wrote:
> The problem seems to be what JB2Cool mentioned in the previous thread. You
> have the planner deco pO2 set to 0.60 instead of 1.60. The available gases
> shows both Bot. MOD and Deco switch at. The Bot. MOD uses the Bottom pO2 and
> 18m for 50% and 4m for 100% seems fine. The deco switch at uses the Deco pO2
> and in your case it shows nonsense -3m for oxygen. I've recreated your plan
> with Deco pO2 set to 0.60 and 1.60 and the 0.60 matches your values.
>
> /Michael

Problem solved. As indicated previously, my finger trouble. Have no idea 
how the preference was set to pO2=0.6

Thank you, Michael.

wf



-- 
This message and attachments are subject to a disclaimer.

Please refer to 
http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf 
<http://upnet.up.ac.za/services/it/documentation/docs/004167.pdf> for
full 
details.