<p dir="ltr"><br>
On Nov 13, 2014 2:04 PM, "Anton Lundin" <<a href="mailto:glance@acc.umu.se">glance@acc.umu.se</a>> wrote:<br>
><br>
> This came out of a discussion with a frend who had his Uwatec 330 show<br>
> him a depth of 72 meters while his Liquivision Xen showed him 69 meters.<br>
> This was due to that his Xen was set in salinity mode, while Uwatec 330<br>
> always shows a depth calibrated against fresh water.</p>
<p dir="ltr">Wow. What an odd choice. But I checked the manual, and it's documented. I guess the idea is that that way it at least shows a deeper depth than real, so it's that conservative choice.</p>
<p dir="ltr">Anyway, I didn't mean to say the patch shouldn't be applied, it's more if a "you seldom even know what the dive computer does, or the actual real depth". It might be a good idea to warn about it, especially since planning using fresh water gives you deeper dives, so while calibrating a dive computer for fresh water is arguably conservative, *planning* for fresh water is not. If your dive equipment shows saltwater depth, you're now diving at higher pressures than you planned for if you follow the depth profile..</p>
<p dir="ltr">    Linus</p>