<p dir="ltr"><br>
On 16 Jul 2015 8:32 am, "Claudiu Olteanu" <<a href="mailto:olteanu.vasilica.claudiu@gmail.com">olteanu.vasilica.claudiu@gmail.com</a>> wrote:<br>
>><br>
>> I can test on my Galaxy s6, which apparently run on Android 5.02. Well I could test it if I knew how.<br>
><br>
><br>
> It will be a great help.<br>
><br>
> First you should pair the devices manually.</p>
<p dir="ltr">And that's where it went wrong. They wouldn't pair. The Petrel says "bt init fail".  I'm off to work now.  Might get a chance this evening to work out pairing.</p>
<p dir="ltr">> Then you can download and install the application <br>
> from here [1] (this is the version which doesn't wait <br>
> for scanning process to finish). Then you can start the<br>
> application and press the button from the upper right <br>
> corner -> Import -> Import from dive computer. <br>
><br>
> After that you should:<br>
> 1. select the vendor and the dive computer <br>
> 2. choose Bluetooth download Mode<br>
> 3. scan for the devices<br>
> 4. wait until the scanning process is done (you will receive a log message when it is done and the Scan button will be enabled)<br>
> 5. start the Download<br>
> 6. wait until it is finished (hopefully)<br>
><br>
> If the download finished with success repeat the <br>
> steps without waiting for scanning process to end (step <br>
> number 4). In my environment the download process<br>
> gets stuck if I don't wait for the scanning task.<br>
><br>
> Sorry for the UI, but currently it doesn't fit on the screen :). <br>
> Anton is probably working to improve it.<br>
><br>
> Claudiu<br>
><br>
> [1] - <a href="https://drive.google.com/file/d/0BwSntkUS-WYzRTFnWjlvbXFINTQ/view?usp=sharing">https://drive.google.com/file/d/0BwSntkUS-WYzRTFnWjlvbXFINTQ/view?usp=sharing</a><br>
>  </p>