latest changes

[roberto forini]

I tried with a more simple dive 10 minutes at 40 meters and a slow ascent
to surface.

If i change directly setting a number in the gfhight It hangs. It doesnt if
i use the up/down buttons

If i change gflow it works fine both with up/down buttons or input the
number directly

:-)

........
>
>
>> OK, I'm not sure why you think you can't use ean40 as travel gas. Add
>> another waypoint for the descent. Change the gas on the first segment to
>> ean40. Then it should do the right thing.
>>
>> What am I missing?
>>
>>

> I check and you are right. It works but... While i was checking i faced a
> bug:
> 1) start a plan
> 2) make a deep dive i used 12/48 ean40 and ean80 for a 100 m depth
> 3) just let the planner put the deco stop and then try to change the
> GFhight. My subsurface hangs.
>
>
> Roberto
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hohndel.org/pipermail/subsurface/attachments/20140604/efd84fe7/attachment.html>