Scubapro Aladin Square

[vavincavent]

I'mwith debian stretch.

With dmesg :

[51221.241299] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[51221.245073] ata1.00: configured for UDMA/100
[51221.580422] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[51221.595293] r8169 0000:02:00.0 enp2s0: link down
[51221.595334] r8169 0000:02:00.0 enp2s0: link down
[51221.595424] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[51221.598295] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[51221.614434] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[51221.634939] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[51221.709568] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[51222.728450] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[51222.774768] wlp3s0: authenticate with 30:7e:cb:e5:ea:2c
[51222.786691] wlp3s0: send auth to 30:7e:cb:e5:ea:2c (try 1/3)
[51222.788699] wlp3s0: authenticated
[51222.789135] wlp3s0: associate with 30:7e:cb:e5:ea:2c (try 1/3)
[51222.792878] wlp3s0: RX AssocResp from 30:7e:cb:e5:ea:2c (capab=0x411
status=0 aid=5)
[51222.792975] wlp3s0: associated
[51222.793020] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes
ready
[51223.177978] r8169 0000:02:00.0 enp2s0: link up
[51223.177985] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes
ready
[51226.238052] usb 1-8: New USB device found, idVendor=04ca,
idProduct=3018
[51226.238054] usb 1-8: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[51228.710451] wlp3s0: authenticate with 30:7e:cb:e5:ea:2c
[51228.723752] wlp3s0: send auth to 30:7e:cb:e5:ea:2c (try 1/3)
[51228.729079] wlp3s0: authenticated
[51228.733108] wlp3s0: associate with 30:7e:cb:e5:ea:2c (try 1/3)
[51228.737851] wlp3s0: RX AssocResp from 30:7e:cb:e5:ea:2c (capab=0x411
status=0 aid=5)
[51228.737955] wlp3s0: associated
[69166.461691] usb 1-1: new full-speed USB device number 10 using
xhci_hcd
[69166.603936] usb 1-1: New USB device found, idVendor=c251,
idProduct=2006
[69166.603938] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[69166.603939] usb 1-1: Product: Square
[69166.603941] usb 1-1: Manufacturer: Uwatec AG
[69166.603942] usb 1-1: SerialNumber: r120A
[69176.778073] hid-generic 0003:C251:2006.0004: usb_submit_urb(ctrl)
failed: -1
[69176.778109] hid-generic 0003:C251:2006.0004: timeout initializing
reports
[69176.778850] hid-generic 0003:C251:2006.0004: hiddev0,hidraw3: USB
HID v1.00 Device [Uwatec AG Square] on usb-0000:00:14.0-1/input0
[69263.297351] usb 1-1: USB disconnect, device number 10
[69307.726333] usb 1-1: new full-speed USB device number 11 using
xhci_hcd
[69307.870369] usb 1-1: New USB device found, idVendor=c251,
idProduct=2006
[69307.870379] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[69307.870385] usb 1-1: Product: Square
[69307.870390] usb 1-1: Manufacturer: Uwatec AG
[69307.870394] usb 1-1: SerialNumber: r120A

And i can't connect with USB like Aladin pro for example.

Vincent.

Le mercredi 08 novembre 2017 à 21:38 +0200, Willem Ferguson a écrit :
> On 08/11/2017 20:29, vavincavent wrote:
> > hi,
> > 
> > I dive with the scubapro Aladin square dive computer.
> > Unfortunatly not supported for download by subsurface.
> > Is it planned? How can i help?
> > 
> > Vincent.
> > _______________________________________________
> > subsurface mailing list
> > subsurface at subsurface-divelog.org
> > http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsur
> > face
> 
> I see the Square has a USB interface, just like the Aladin Sport.
> What 
> happens if you specify any of the Uwatec or Scubapro dive computers
> that 
> also use USB?
> 
> Kind regards,
> 
> willem
> 
> 
>