g2

[Stéphane]

Hello,

Thank you for your help. My G2 is now perfectly recognized by Subsurface.
I would not find without your help.

Would it be possible to integrate this udev rule during the subsurface 
installation?

Thanks again,

Stéphane

Le 29/08/2019 à 18:23, Adric Norris a écrit :
> You likely need to create a udev rule, to set appropriate permissions 
> after the device is connected via USB. Here's the udev rule file I use 
> for this purpose.
>
> $ cat /etc/udev/rules.d/51-divecomputers.rules
> # ScubaPro G2
> SUBSYSTEM=="usb", ATTR{idVendor}=="2e6c", ATTR{idProduct}=="3201", 
> OWNER:="adric", GROUP:="adric", MODE:="0600"
>
> Please note that "adric" is the name of my local user account, so 
> you'll need to adjust it to match your environment. Also, you'll need 
> to run "|udevadm control --reload-rules" after dropping the file into 
> place... followed by "sudo udevadm trigger" if the device is already 
> plugged in.
> |
>
>
> On Thu, Aug 29, 2019 at 11:14 AM Stéphane <s.poveda at orange.fr 
> <mailto:s.poveda at orange.fr>> wrote:
>
>     Bonjour,
>
>     Je souhaite importer mes plongées depuis un Scubapro G2, en mode USB.
>     Mais il n'est pas reconnu.
>
>     Est-il compatible avec le logiciel Subsurface ?
>
>     Je suis sur Ubuntu Ubuntu 18.04.3 LTS et noyau 4.15.0-58-generic.
>
>     Je n'ai pas trouvé d'info sur le Forum.
>
>     En vous remerciant pour votre retour.
>
>     Stéphane Poveda
>
>     _______________________________________________
>     subsurface mailing list
>     subsurface at subsurface-divelog.org
>     <mailto:subsurface at subsurface-divelog.org>
>     http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
>
>
>
> -- 
> "In the beginning the Universe was created. This has made a lot of 
> people very angry and been widely regarded as a bad move." -Douglas Adams
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20190831/9d3a2ac8/attachment.html>