Cylinder list mismatch

[Steve]

I think the current situation is quite workable and some users might
not want any filtering.

When diving a rebreather I don't  actually switch gases and can carry a
lot of bailout tanks that don't get used but like to see what tanks and
gas mixes I actually carried on the dive.
Same with cave diving I might stage tanks on route but some are only
for safety and only get used if there was an issue.
People in the team might add the gasses to their computer but leave
them inactive / turned off so not to mess us the calculations and only
activate them if they were to use them.

Steve

On Sun, 2022-06-12 at 20:04 -0700, Dirk Hohndel via subsurface wrote:
> Yeah, Steve is spot on.
> 
> A couple of dive computers will import all gases that are configured,
> even if you never switched to them. And if you have a default
> cylinder configured in Subsurface, then this turns into these ghost
> cylinders.
> 
> One option is to delete them.
> 
> But I'm wondering, Berthold (who I know is traveling right now, but
> this is decidedly his code)... would it make sense to have the Filter
> code ignore unused cylinders?
> 
> /D
> 
> > On Jun 12, 2022, at 6:38 PM, Steve  wrote:
> > 
> > 
> > 
> > On Sun, 2022-06-12 at 23:04 +0000, Mark Stiebel via subsurface
> > wrote:
> > > Another little quirk I found when looking for previous deco
> > > dives.. I did a search for all dives with O2% > 40%, and
> > > Subsurface found five dives from 3 or 4 years ago that were
> > > certainly not deco dives.  The cylinder list for all the dives
> > > shows only a single air cylinder. But when I export those dives
> > > as XML, there are multiple <cylinder> tags.
> > > 
> > > This is the strangest one:
> > > 
> > > Only one cylinder - a 10L steel, 214 SP, 75 EP, air.
> > > But for this dive, the XML export shows:
> > > 
> > > 
> > > Five cylinder tags. Now this was from 2017, so I can't remember
> > > if I made edits to the cylinder, or added and deleted cylinders,
> > > or anything else. I can say I am pretty sure I've never dived
> > > with my twin 12s filled with 50% or 100% though!!
> > > 
> > > If this is a historical quirk with something, what is the best
> > > way to correct the cloud storage version? Do I need to export the
> > > dives to XML, delete them from cloud, then import the XML and re-
> > > sync to cloud?
> > > 
> > > Thanks,
> > > 
> > > Mark.
> > > 
> > 
> > 
> > 
> > My dive computers do this as it imports all of the mixes no matter
> > if they are  active or turned off in the dive computer.
> > 
> > The easiest way to deal with them:
> > There is a preference setting in equipment to show unused cylinders
> > so if you turn that on then you can see and delete them in the gui
> > if they were not used on the dive.
> > 
> > Steve
> > 
> 
> _______________________________________________
> subsurface mailing list
> subsurface at subsurface-divelog.org
> http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20220613/ec546f38/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: jlvgjk3n.png
Type: image/png
Size: 5453 bytes
Desc: not available
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20220613/ec546f38/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: njuvyfgm.png
Type: image/png
Size: 56608 bytes
Desc: not available
URL: <http://lists.subsurface-divelog.org/pipermail/subsurface/attachments/20220613/ec546f38/attachment-0003.png>